Drop End Style - End Panels Too Short: Crate Pro 5
Support Team
started a topic
about 9 years ago
When I design I drop-end style. The end panels are coming out too short.
Best Answer
S
Support Team
said
about 9 years ago
-Crate Pro 5: Drop Ends
What you want to check before you design any Drop-End style is your tolerance setting in Setup.
Go to Setup module >> Light Duty Plywood Cap (or the correct style family) >> Rules & Other: Check the value in the field "End Panel to floor distance on a Drop Panel".
The value in this field reduces the end panel height by that amount from either the floor or rub strips. This value will reduce the end panel by that height from the bottom of the skid or top of the rub strips if applied. This keeps the panel from extending to the floor or top or the rub strip where it could easily be torn off by forks or by a sling.
1 Comment
Support Team
said
about 9 years ago
Answer
-Crate Pro 5: Drop Ends
What you want to check before you design any Drop-End style is your tolerance setting in Setup.
Go to Setup module >> Light Duty Plywood Cap (or the correct style family) >> Rules & Other: Check the value in the field "End Panel to floor distance on a Drop Panel".
The value in this field reduces the end panel height by that amount from either the floor or rub strips. This value will reduce the end panel by that height from the bottom of the skid or top of the rub strips if applied. This keeps the panel from extending to the floor or top or the rub strip where it could easily be torn off by forks or by a sling.
Support Team
When I design I drop-end style. The end panels are coming out too short.
-Crate Pro 5: Drop Ends
What you want to check before you design any Drop-End style is your tolerance setting in Setup.
Go to Setup module >> Light Duty Plywood Cap (or the correct style family) >> Rules & Other: Check the value in the field "End Panel to floor distance on a Drop Panel".
The value in this field reduces the end panel height by that amount from either the floor or rub strips. This value will reduce the end panel by that height from the bottom of the skid or top of the rub strips if applied. This keeps the panel from extending to the floor or top or the rub strip where it could easily be torn off by forks or by a sling.
Support Team
-Crate Pro 5: Drop Ends
What you want to check before you design any Drop-End style is your tolerance setting in Setup.
Go to Setup module >> Light Duty Plywood Cap (or the correct style family) >> Rules & Other: Check the value in the field "End Panel to floor distance on a Drop Panel".
The value in this field reduces the end panel height by that amount from either the floor or rub strips. This value will reduce the end panel by that height from the bottom of the skid or top of the rub strips if applied. This keeps the panel from extending to the floor or top or the rub strip where it could easily be torn off by forks or by a sling.