How to handle the Caseline Not Calculating for all panels
Support Team
started a topic
over 8 years ago
In Build 3045 and older if you select Caseline > and select the CAP panel. It should calculate for the Top / Ends /SIdes. But the amount of caseline being calculated is only for the Top. What is the workaround?
Best Answer
S
Support Team
said
over 8 years ago
I'll first cover your Caseline settings then the workaround.
NOW YOU HAVE SET UP YOUR DEFAULTS FOR CASELINE MATERIAL. ONCE SET YOU DO NOT NEED TO MODIFY THEM UNLESS YOU FIND YOUR VALUES WHEN YOU ADD CASELINE TO YOUR DESIGN ARE NOT COMING OUT AS EXPECTED. THE NEXT STEPS ARE TO APPLY THE CASELINE AND THE WORKAROUND FOR APPLYING CASELINE TO ALL PANELS OF THE CAP.
NOW THAT YOU HAVE THE LINEAR FEET (METERS) NEEDED FOR THE LONG VALUE GO TO THE DESIGN >PACKING> OTHER AND SELECT THE WRAPPING CATEGORY > CASELINE AND ENTER THE VALUE .
1 Comment
Support Team
said
over 8 years ago
Answer
I'll first cover your Caseline settings then the workaround.
NOW YOU HAVE SET UP YOUR DEFAULTS FOR CASELINE MATERIAL. ONCE SET YOU DO NOT NEED TO MODIFY THEM UNLESS YOU FIND YOUR VALUES WHEN YOU ADD CASELINE TO YOUR DESIGN ARE NOT COMING OUT AS EXPECTED. THE NEXT STEPS ARE TO APPLY THE CASELINE AND THE WORKAROUND FOR APPLYING CASELINE TO ALL PANELS OF THE CAP.
NOW THAT YOU HAVE THE LINEAR FEET (METERS) NEEDED FOR THE LONG VALUE GO TO THE DESIGN >PACKING> OTHER AND SELECT THE WRAPPING CATEGORY > CASELINE AND ENTER THE VALUE .
Support Team
In Build 3045 and older if you select Caseline > and select the CAP panel. It should calculate for the Top / Ends /SIdes. But the amount of caseline being calculated is only for the Top. What is the workaround?
I'll first cover your Caseline settings then the workaround.
NOW YOU HAVE SET UP YOUR DEFAULTS FOR CASELINE MATERIAL. ONCE SET YOU DO NOT NEED TO MODIFY THEM UNLESS YOU FIND YOUR VALUES WHEN YOU ADD CASELINE TO YOUR DESIGN ARE NOT COMING OUT AS EXPECTED. THE NEXT STEPS ARE TO APPLY THE CASELINE AND THE WORKAROUND FOR APPLYING CASELINE TO ALL PANELS OF THE CAP.
NOW THAT YOU HAVE THE LINEAR FEET (METERS) NEEDED FOR THE LONG VALUE GO TO THE DESIGN >PACKING> OTHER AND SELECT THE WRAPPING CATEGORY > CASELINE AND ENTER THE VALUE .
Support Team
I'll first cover your Caseline settings then the workaround.
NOW YOU HAVE SET UP YOUR DEFAULTS FOR CASELINE MATERIAL. ONCE SET YOU DO NOT NEED TO MODIFY THEM UNLESS YOU FIND YOUR VALUES WHEN YOU ADD CASELINE TO YOUR DESIGN ARE NOT COMING OUT AS EXPECTED. THE NEXT STEPS ARE TO APPLY THE CASELINE AND THE WORKAROUND FOR APPLYING CASELINE TO ALL PANELS OF THE CAP.
NOW THAT YOU HAVE THE LINEAR FEET (METERS) NEEDED FOR THE LONG VALUE GO TO THE DESIGN >PACKING> OTHER AND SELECT THE WRAPPING CATEGORY > CASELINE AND ENTER THE VALUE .